Floor Preparation

Evenfloors Ltd assess each industrial flooring substrate & advise on the type or combination of industrial flooring preparation types required.

These could be Shotblasting, Scabbling, Scarification, Diamond Grinding, and Removal of surface contamination.

Based on the survey Evenfloors Ltd have the equipment & experience to carry out the most effective industrial flooring preparation process, shotblasting being the most efficient including repairs to cracks & holes so that the applied industrial flooring system achieves the best possible finish.

Oil contamination & grease can be removed by degreasing detergents & epoxy resin oil suppressant primers.

Floor Preparation is the single most important process to achieve the best result for the following industrial flooring system.

Captive (dust free) Shotblasting

Shotblasting is the most effective & economical form of Floor Preparation for all industrial flooring applications. The machines used are coupled to dust extraction units, which keep circulating dust to an absolute minimum. Large areas of industrial flooring can be prepared quickly with little disruption to clients.

Floor Preparation - Shotblasting and Scabbling

Scabbling

Evenfloors Ltd often use scabblers prior to shotblasting poor industrial flooring substrates. Scabbling is much slower than shotblasting but ideal for removing patches of thick flaky coatings & oil contaminated industrial flooring.

Diamond Grinding

Triple head machines are used to remove undulations & contamination on industrial flooring. Smaller areas & edgework can be carried out with hand held grinders.

Scarifying

Either by diamond grinding or STR machines with wire attachment pads to provide suitable keying for industrial flooring applications.